Automatic hexagonal wire mesh machine

Short Description:

Product Detail

Product Tags

Automatic Hexagonal Wire Mesh Machine

Hexagonal wire mesh is a wire mesh made of diagonal cut wire mesh (hexagonal) woven from metal wires. The diameter of the wire used varies according to the size of the hexagonal wire mesh. Small hexagonal grids with galvanized metal layers usually use metal wires with a diameter of 0.4-2.0 mm, while grids with a PVC layer usually use PVC metal wires with a diameter of 0.8-2.0 mm. This kind of hexagonal net is widely used in the isolation net of farmland, pasture fence, animal cage and building wall. This is a very promising product.

The automatic hexagonal wire mesh machine produced by our factory realizes the automation of the hexagonal wire mesh production. This type of hexagonal net machine omits most of the mechanical structure, and is changed from mechanical transmission to a motor that directly drives the machine to run, which greatly reduces the failure rate of the machine and the noise generated by the machine. This series of products also adopt the positive and negative principle weaving technology to directly produce the metal hexagonal net suitable for the specifications of the loom. Currently there are various models, such as 1/2 inch, 3/4 inch, 1 inch, 1.2 inch, 1.5 inch, 2 inch, 3 inch, etc. Various machines and accessories can also be customized according to customer needs. The metal hexagonal net knitting machine has the characteristics of reasonable design, simple structure, stable operation, good performance, high efficiency and convenient maintenance. It is exported to Europe, America, Southeast Asia, Middle East, Africa and other countries and regions.

Basic technical parameters


 Mesh size


Wire diameter


Maximum width


Motor Power



























Remark:Can manufacture customized type


1. Fully automatic CNC hexagonal net machine adopts PLC computer touch screen design, high efficiency and high configuration economical machinery, absolute value programming technology, high precision, servo drive, stable performance and safe operation.

2. Fully automatic CNC positive and negative twisting hexagonal wire mesh machine is equipped with four servo motors for simultaneous transmission, instead of traditional mechanical transmission. Low noise, fast speed, stable production, high production efficiency, low production cost, etc.

3. Install and set up an infrared alarm system, computer automatic counting, automatic wire break stop, reduce the time waste of repairing the net after the broken wire is broken, and greatly improve the production efficiency.

4. Intelligent high-precision PLC computer system control, the mesh is beautiful, flat and uniform, and can be reinforced in the middle of any mesh to enhance the tensile strength.

5. The machine is equipped with an automatic lubrication system and adopts centralized lubrication, which is flexible and convenient to operate and prolongs the life of the machine.


Hexagonal mesh is also called twisted mesh, insulation mesh, and soft-edged mesh. This small hexagonal net is mainly used for feeding chickens, ducks, geese, rabbits and zoo fences, protection machinery, highway fences, stadium fences and road green belt protection nets, slope planting (greening), mountain rock surface hanging nets Spraying etc. After the wire mesh is made into a box-shaped container, the net box is filled with chaotic stones, etc., which can be used to protect and support sea embankments, hillsides, roads, bridges, reservoirs and other civil engineering. It is a good material for flood control and flood resistance.


1. hexagonal wire mesh machine 

2. Spool

3. Spool stand

4. Winding machine

5. Tight wire stand

Layout reference


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories